光伏转换率高(30%以上),大大节省电力和成本,保证最高的生产效率
High photovoltaic conversion rate (more than 30%), greatly saving electricity and costs, ensuring the highest production efficiency
加工时,激光器只消耗电能,不需要额外的气体(只需辅助气体),带来最低的运营和维护成本
During processing, the laser only consumes electrical energy and does not require additional gas (only auxiliary gas), resulting in the lowest operating and maintenance costs.
采用半导体模块化、冗余设计,谐振腔内无任何光学玻璃且无启动时间,稳定性高,无需调整和维护,节省了维护成本
在这一点上,是传统激光无法比拟的
Using semiconductor modular and redundant design, there is no optical glass in the resonant cavity and no start-up time.
It has high stability and requires no adjustment and maintenance, saving maintenance costs.
光纤激光器的输出波长为1.06μm,是CO2波长的十分之一
At this point, it is unmatched by traditional lasers
输出光束为质量和功率密度高,容易被金属材料吸收,因此具有很大的
The output wavelength of the fiber laser is 1.06μm, which is one-tenth the wavelength of CO2
动力切割和焊接使加工成本最低
The output beam has high quality and power density and is easily absorbed by metal materials, so it has great
powered cutting and welding keeps tooling costs to a minimum
Model | HM-1390S Fiber laser cutting machine |
Effective working area | 1300*900mm working area |
Laser source | 1000/1500/2000/3000W Raycus/ MAX fiber laser source |
Laser cutting head | Raytools or WSX laser head |
Bed structure | High rigidity welded steel framework |
Working Table | Blade table |
Guide rail | Taiwan Hiwin linear square guide rail 25mm |
Transmission | X,Y with helical gear rack ,Z with TBI ball screw |
Motor & driver | FUJI servo motor & driver, X,Y axis 750w, Z axis 400w |
Control system | FSCUT 1000S/2000C control system |
Software | CypOne laser cutting software with BMC 1603 control card |
Chiller | S&A, Dual Temperature Control or Hanli brand chiller |
Reducer | Japan imported SHIMPO reducer |
Lubrication system | Electric automatic lubrication system |
Pressure valves | High-pressure(N2,air):2.5MPa(Shuoda) |
Low-pressure(O2):1MPa(SMC) | |
Electronic Proportional Valve | SMC from Japan |
Electronic Components | SCHNERDER, Omron |
Max. idling speed | 80m/min |
Positioning Accuracy | ±0.03mm |
Re-Positioning Accuracy | ±0.02mm |