激光打标
激光雕刻
激光切割
激光焊接
激光清洗
激光设备配件
专用设备
关闭
热门搜索：
产品特点可以保护清洗物体的表面。 确保其完好无损。
针对不同基材表面的不同污垢，光纤激光清洗机可以通过设置光斑尺寸、单脉冲能量、脉冲宽度、重复频率等激光参数，
在不损伤基材的情况下选择性地清洁污垢
It can protect the surface of the cleaning object. Make sure that it is intact. For different dirt on different substrate surfaces,
the fiber laser cleaning machine can selectively clean the dirt without damaging the substrate by setting laser parameters
such as spot size, single pulse energy, pulse width, repetition rate, etc
环保、绿色清洁
It's environmentally friendly and green cleaning
可清洗易碎材料的表面。 由于激光清洗是机器与物体非接触，因此可以方便地进行清洗操作。
并且非常容易清理其他常规清洁方法无法到达的区域。
It can clean the surface of the fragile material. Since laser cleaning is non-contact between the machine and the object,
it is convenient to carry out the cleaning operation.
And very easy to clean up the area which other conventional cleaning method cannot be reached
速度快、成本低
Fast speed with low cost
可以保护清洗物体的表面。 确保其完好无损。
针对不同基材表面的不同污垢，光纤激光清洗机可以通过设置光斑尺寸、单脉冲能量、脉冲宽度、重复频率等激光参数，
在不损伤基材的情况下选择性地清洁污垢
It can protect the surface of the cleaning object. Make sure that it is intact. For different dirt on different substrate surfaces,
the fiber laser cleaning machine can selectively clean the dirt without damaging the substrate by setting laser parameters
such as spot size, single pulse energy, pulse width, repetition rate, etc
环保、绿色清洁
It's environmentally friendly and green cleaning
可清洗易碎材料的表面。 由于激光清洗是机器与物体非接触，因此可以方便地进行清洗操作。
并且非常容易清理其他常规清洁方法无法到达的区域。
It can clean the surface of the fragile material. Since laser cleaning is non-contact between the machine and the object,
it is convenient to carry out the cleaning operation.
And very easy to clean up the area which other conventional cleaning method cannot be reached
速度快、成本低
Fast speed with low cost
应用领域
产品参数
| Machine Model | HM-100W | HM-200W | HM-300W |
| Laser Power | 100W | 200W | 300W |
| Laser Wavelength | 1064-1080nm | 1064-1080nm | 1064-1080nm |
| Pulse Width | 0.1-20ms | 0.1-20ms | 0.1-20ms |
| Fiber Length | 4.5M | 4.5M | 4.5M |
| Laser Pulse Frequency | 1-20HZ | 1-20HZ | 1-20HZ |
| Adjusted spot range | 0.1-3mm | 0.1-3mm | 0.1-3mm |
| Working Voltage | 1PHRASE 220V ±10% | 1PHRASE 220V ±10% | 3PHRASE 380V ±10% |
| Minimum Welding pool | 0.1mm | 0.1mm | 0.1mm |
| Cooling System | Aircooling | Aircooling | Aircooling |
Tel：+86 18917430806
E-mail：sales@seorlasers.com
地址：上海市奉贤区肖塘路255弄10号1层